/* $Id: xuartlite_selftest.c,v 1.1.2.1 2009/11/24 05:14:30 svemula Exp $ */
/******************************************************************************
*
* (c) Copyright 2002-2009 Xilinx, Inc. All rights reserved.
*
* This file contains confidential and proprietary information of Xilinx, Inc.
* and is protected under U.S. and international copyright and other
* intellectual property laws.
*
* DISCLAIMER
* This disclaimer is not a license and does not grant any rights to the
* materials distributed herewith. Except as otherwise provided in a valid
* license issued to you by Xilinx, and to the maximum extent permitted by
* applicable law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND WITH ALL
* FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS, EXPRESS,
* IMPLIED, OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF
* MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE;
* and (2) Xilinx shall not be liable (whether in contract or tort, including
* negligence, or under any other theory of liability) for any loss or damage
* of any kind or nature related to, arising under or in connection with these
* materials, including for any direct, or any indirect, special, incidental,
* or consequential loss or damage (including loss of data, profits, goodwill,
* or any type of loss or damage suffered as a result of any action brought by
* a third party) even if such damage or loss was reasonably foreseeable or
* Xilinx had been advised of the possibility of the same.
*
* CRITICAL APPLICATIONS
* Xilinx products are not designed or intended to be fail-safe, or for use in
* any application requiring fail-safe performance, such as life-support or
* safety devices or systems, Class III medical devices, nuclear facilities,
* applications related to the deployment of airbags, or any other applications
* that could lead to death, personal injury, or severe property or
* environmental damage (individually and collectively, "Critical
* Applications"). Customer assumes the sole risk and liability of any use of
* Xilinx products in Critical Applications, subject only to applicable laws
* and regulations governing limitations on product liability.
*
* THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS PART OF THIS FILE
* AT ALL TIMES.
*
******************************************************************************/
/****************************************************************************/
/**
*
* @file xuartlite_selftest.c
*
* This file contains the self-test functions for the UART Lite component
* (XUartLite).
*
* <pre>
* MODIFICATION HISTORY:
*
* Ver   Who  Date     Changes
* ----- ---- -------- -----------------------------------------------
* 1.00a ecm  08/31/01 First release
* 1.00b jhl  02/21/02 Repartitioned the driver for smaller files
* 2.00a ktn  10/20/09 Updated to use HAL Processor APIs. The macros have been
*		      renamed to remove _m from the name.
* </pre>
*
*****************************************************************************/

/***************************** Include Files ********************************/

#include "xil_types.h"
#include "xil_assert.h"
#include "xstatus.h"
#include "xuartlite.h"
#include "xuartlite_i.h"
#include "xil_io.h"

/************************** Constant Definitions ****************************/


/**************************** Type Definitions ******************************/


/***************** Macros (Inline Functions) Definitions ********************/


/************************** Variable Definitions ****************************/


/************************** Function Prototypes *****************************/


/****************************************************************************/
/**
*
* Runs a self-test on the device hardware. Since there is no way to perform a
* loopback in the hardware, this test can only check the state of the status
* register to verify it is correct. This test assumes that the hardware
* device is still in its reset state, but has been initialized with the
* Initialize function.
*
* @param	InstancePtr is a pointer to the XUartLite instance.
*
* @return
* 		- XST_SUCCESS if the self-test was successful.
* 		- XST_FAILURE if the self-test failed, the status register
*			value was not correct
*
* @note		None.
*
******************************************************************************/
int XUartLite_SelfTest(XUartLite *InstancePtr)
{
	u32 StatusRegister;

	/*
	 * Assert validates the input arguments
	 */
	Xil_AssertNonvoid(InstancePtr != NULL);
	Xil_AssertNonvoid(InstancePtr->IsReady == XIL_COMPONENT_IS_READY);

	/*
	 * Read the Status register value to check if it is the correct value
	 * after a reset
	 */
	StatusRegister = XUartLite_ReadReg(InstancePtr->RegBaseAddress,
					XUL_STATUS_REG_OFFSET);

	/*
	 * If the status register is any other value other than
	 * XUL_SR_TX_FIFO_EMPTY then the test is a failure since this is
	 * the not the value after reset
	 */
	if (StatusRegister != XUL_SR_TX_FIFO_EMPTY) {
		return XST_FAILURE;
	}

	return XST_SUCCESS;
}